PC discussion and help!

BTW. Im done with my PC. Its ready.
Box cooler is really crap... + I need Blu-Ray drive

Guest

ehehe yes kimi the standard cooler suck really. You need blue ray??????you is a sucking pirate in your pc no one file is original :PPPPPPPPPPPP

Posts : 980 Join date : 2010-09-26

If your temps are to high Andrew you can try disabling HT in the bios untill you get a better heatsink, it should lower your temperatures quite a lot. It's not like you need HT for gaming and general use.

Also.. Why a Blu-Ray drive? You buy Blu-Ray movies? :l

LoL Pink

lol I was kidding about Blu-ray

And CPU temp is 45-50 °C lol!

Guest

full load ? 45-50 ?

No.. normal state 45-50... is it high?

Guest

Posts : 980 Join date : 2010-09-26

Useless pic is useless, you have watercooling, no HT and speedstep enabled Razz

Anyway, Andrew.. Yes that is high for idle, you are probably hitting 80c+ under heavy load, maybe the heatsink didn't mount correctly if it did though.. I'd disable HT to lower temps.

btw Pink, install SP1 and update Linx you will get over 100 gflops and it will stress your CPU correctly, old Linx doesn't work correctly with 1155. Also stop using SMALL problem size with very little ram! You should be using all ram to correctly check for stability/temps and you know that ;x

Guest

emh cano i have seven cracked version Neutral

, and i hate wait more h for stability test -.-"""

BTW prime95 is better for 1155, i use 2h it and don't have error

I was wrong, in normal state
PC discussion and help! - Page 13 110

Anyway, Im gonna disable HT... really no need to me

Posts : 980 Join date : 2010-09-26

You need to run atleast 8 hours in Prime Pink ;x

and those temps look ok Andrew, if you disable HT and temps only drop 2-3c I would turn it back on Wink

So how you likeing your new PC anyway? Happy with GPU? Tried many games?

I'm super bored with this 6600GT Sad

There is a HD5850 for sale for £120 I'm tempted to buy D;

PC is very good. I liked my LED monitor too Razz

GPU is good too. I tried only SWAT4 and Battlefieldplay4free only :D: :D:

Guest

Itachi wrote:: PC is very good. I liked my LED monitor too
GPU is good too. I tried only SWAT4 and Battlefieldplay4free only

try BF BC 2 for see any difference

Posts : 980 Join date : 2010-09-26

Motherboard and CPU sold... I spent most of the money from the GPU though so I can't order 2500k etc yet Sad

Guest

560 gtx + 2500k + p8p67 ?

btw new daily use: all with auto, 46x100, pll enable, vcore 1.35

Posts : 980 Join date : 2010-09-26

idk about GPU yet, I must wait a few weeks then I will decide Wink

but yeah I think P8P67 Pro and 2500k. Now I must use shitty laptop which is even worse than 6600GT :D Ugh I'll need to reformat for new parts too Sad

I hate formatting.. Must back up everything because I can't download updates again for BFBC etc ;x

btw auto is for girls :p

Guest

good choice, but why not gigabyte ud3p or ud4?

I know auto is gay, but i try only now i have setting pch pll and now 46x100 at 1.350 Smile

)))

PC discussion and help! - Page 13 Geforce_gtx_590_specs

consumption = a lot ahahahaha

Posts : 980 Join date : 2010-09-26

UD3P doesn't support SLI and UD4 idk, I just dont want it Razz

btw

http://newsroom.intel.com/community/intel_newsroom/blog/2011/01/31/intel-identifies-chipset-design-error-implementing-solution

http://www.engadget.com/2011/01/31/intel-finds-sandy-bridge-chipset-design-flaw-shipments-stopped/

Apparently affects every current 1155 board.. I was going to buy a motherboard first then CPU but I might buy the CPU first now and wait for new revisions of 1155 boards, I don't want to buy a faulty board and wait for the recall ;x

Guest

oh well bad news

http://forums.anandtech.com/showthread.php?p=31170216

"It isn't a critical problem right now, though, so if you own a Sandy Bridge Core i5 or Core i7 system keep computing with confidence while looking for a recall notice," WTF

Guest

btw i use marvell chipset for my hd, raid FTW

Guest

http://www.anandtech.com/show/4142/intel-discovers-bug-in-6series-chipset-begins-recall

I just check the link you gave me PINK and read it all... Well as you said, its not so big problem, but still... dangerous -.-

Posts : 980 Join date : 2010-09-26

Mhm not a huge problem if you don't use more than a couple of HD's, I'd still contact the retailer or manufacturer to see if they will be giving replacements, probably won't be shipping updated boards untill April though :l

I posted my cpu and motherboard this morning btw, stuck with ATI mobility HD2400 now Sad

I forgot to bring a VGA cable to plug it into my monitor too >;l

Guest

Cano if you use the blck at 102 for the daily use, can make the damage ?? i try to search in the OCN forum but no one talk of this